9
Tornado PET 700w Cyclonic Vacuum Cleaner
FLR00048
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
2.
To empty the cleaner, press the
Cylinder Release
Catch
(1) and remove the Cylinder from the vacuum
by the
Cylinder Handle
(8).
Hold the
Dust Compartment
(6) over a dust bin and
press the
Dust Release Catch
(20) (arrowed right)
and the base of the dust compartment will swing
open and allow the collected dust to fall out into the
dust bin.
3.
Hold the Cylinder by the
Dust Compartment
(6) and lift the
Cylinder Filter Catch
(7) and
open the top of the Cylinder and lift out the
Filter as shown left.
5.
Remove the Cotton (a) and the foam filter (b). Wash the
filters in warm running water until clean. Allow the filters
to dry thoroughly for 24 hours before reuse.
6.
Lift the Cyclonic filter (c) out of the
Dust Compartment
(6)
and again wash carefully in running water until clean.
Allow the filter to dry for 24 hours before reuse.
NB
avoid wetting the lid section whilst cleaning.
WARNING
do not continue to use your vacuum cleaner once the ‘MAX’ mark has been
reached as permanent damage may occur to the appliance.
2
4.
Hold the Cylinder by the and twist off the
Dust
Compartment
(6) to remove the Cyclonic Filter
from the top of the Cylinder as shown right.
3
4
a.
b.
c.
5
6
&
