10
Tornado PET 700w Cyclonic Vacuum Cleaner
FLR00048
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
7.
Remove the mesh from around the Cyclonic
filter and wash in warm running water until
clean. Allow the mesh to thoroughly dry for
24 hours before re-fitting it back around the
Conical
Filter
(c) above.
Care and Use of your Vacuum Cleaner
WARNING
Always disconnect the cleaner from the mains power supply before cleaning.
•
Clean outside of the cleaner with a clean damp cloth. Never clean with harsh or abrasive
cleaners.
•
Do not submerge the cleaner in water or any other liquids.
•
Empty the
Dust Compartment
(6) as soon as the ‘MAX’ line is reached.*
•
Wash the Cotton, Hepa, Sponge and Cyclonic Filters regularly
–
see table below.
•
Allow all the filters to thoroughly dry out for 24 hours before reassembly and use.
*WARNING
do not continue to use your vacuum cleaner once the ‘MAX’ mark has been
reached as permanent damage may occur to the appliance.
8
8. Finally, remove the outlet Hepa filter located under the cylinder as follows:
a. Remove the filter cover by pushing the catch to the right and then lift out the cover.
b. The Hepa Filter is revealed under the cover.
c. Remove the filter, wash clean and allow to dry for 24 hours ensuring it is thoroughly
dry before reuse.
a.
b.
c.
7
