background image

15

Time Lapse Video Cassette Recorder

14

Time Lapse Video Cassette Recorder

Normal Recording 

Normal Recording

1

Turn the power on to all devices used.

2

Load a cassette tape with erasure prevention tab in
place.

3

Press the REC/PLAY SPEED

(or 

) button to set

the recording speed.

• The recording speed is displayed on-screen and on the

display panel.

• If you don’t want to record the recording speed,

counter, title, time, date etc, press the DISPLAY button,
then start recording.

4

Press the REC button.

• The “REC” indicator is displayed on the display panel

and recording starts.

5

To stop recording, press the STOP button.

• If the Repeat Rec Set is set

to  “NO” in the REC

MODE SET menu ,

recording will continue to

the end of the tape, then

stop and the tape will be

ejected. 

• A tape recorded on this

VCR cannot be played

back on another make of

time lapse VCR.

• If you press on the REC

button and the loaded

cassette has no erasure-

prevention tab, the VCR

will eject the cassette.

• During recording, the

Menu button will not

function (the menu cannot

be accessed).

Record Pause

Recording can be interrupted temporarily.

1

Press the PAUSE/STILL button during recording. 

• The “REC” and  “ 

»

” indicators are displayed on the

display panel.

2

To resume recording, press the REC button, or press
the PAUSE/STILL button again.

✎ 

(SP) means to be recorded by SP heads.

(LP) means to be recorded by LP heads.

• During pause, the image

appears on screen but it is

not recorded.

• If a recording pause

continues for 5 minutes or

more, the VCR will go into

stop mode to avoid

damage to the tape.

• If you playback the

recorded part where

recording check was

performed, noise may

appear.

• If you change the

recording speed during

recording, noise or

missing signal may result.

<Recording Speed>

3(SP)

4(SP)

1/50 Sec

50

6(LP)

8(LP)

1/50 Sec

50

YES

Continuous

18(LP) 24(LP) 3/50 Sec 16.67

30(LP) 40(LP) 5/50 Sec

10

48(SP) 64(SP) 16/50 Sec 3.13

NO

Intermittent

Recording

Speeds &

Duration

E-180

Recording

Duration

E-240

Recording

Intervals

Rec.

Fields

/ Sec.

Audio

Record-

ing

Tape Motion

Summary of Contents for EV-VCR024R



























Reviews: