SOFTENER DISPENSER
This is the device to dispense the softener automatically by centrifugal force.
This is installed inside the auto-balancer.
FUNCTIONAL PRINCIPLE
1. Softener stays in room (A) when pour the softener to softener inlet.
2. Softener move (A) to (B) by centrifugal force during intermediate spin process.
3. Softener flow (B) to (C) during rinse process next of intermediate spin.
4. Softener move (C) to (D) by centrifugal force during second intermediate spin.
And after finish spin process, softener drop between tub and outer tub ass'y from softener outlet.
FLOW OF THE SOFTENER
FLOW OF THE SOFTENER INSIDE OF THE BALANCE
NOTE: Softener moves into next room when r.p.m of the tub is more than 100 r.p.m.
HOW TO CHECK MOVEMENT
Pour a reasonable amount of "MILK" into softener dispenser
and operate the washer with no load.
In final rinse cycle, make sure than the milk is added into the
tub through softener outlet.
7
Balancer
Softener inlet
Softener outlet
A
C
D
B
Wash
intermediate
Hold
intermediate
Rinse
Spin
Spin
Spin
Normal
Centrifugal force
Flow by
Centrifugal force
Flow by
weight
weight
Course
(A)
(B)
(C)
(D)
Room inside
the balancer
Flow by
Centrifugal
force
A
B
C
D