HOW TO INSTALL THE DRAIN HOSE
NOTE IN USING THE DRAIN HOSE
Never forget to install drain hose before operating this washing machine.
There are a drain hose, a hose clamp, a hose fixture and a hose guide in the washing machine.
NOTES:
1. Keep the drain hose fixed tightly in the hose fixture, or let the highest point of the drain hose be more than 1m above the
floor.
2. Be sure that the height of the drain hose must be less than 1.5m above the floor.
If not so, the water in the washer could not drain.
3. The hoseguide MUST be fitted to the drain hose. The drain hose sould not extend more than 55mm from the end of the
hose guide. This is to prevent ‘SYPHONING’.
If necessary the drain hose can be trimmed to length.
18
¡
Connect the drain hose to the
drain outlet at the back side of the
washing machine, and fasten it
tightly with the clamp supplied.
™
Insert the hose fixture into hook
hole at the side of the body, and
fix the drain hose by inserting it
into the hose fixture.
£
Attach the hose guide, included in
the accessory kit, to guide the
drain hose over the tub or
standpipe.
Hose Clamp
Drain Output
Drain hose
Hook Hole
Hose Fixture
Drain Hose
55 mox
Pull Hose
through
Hlex. Hose
Guide
apart
¢
Hook the drain hose to the edge
of the tub, paying attention that
there are no bends or
constractions along the drain
hose
Or, connect the drain hose to a
standpipe of a diameter greater than
that of the drain hose and at a height
of min. 70cm.
∞
Position the washing machine
next to the wall.
70Cm min
MUST be
ventilated