DW-8000P
Installation Guide
9
NDIS Driver Install for Windows 2000
To install ADI PCI NIC device drivers for Windows 95/98:
1.
Start Windows 2000 on your computer with the NIC board installed.
2.
Windows 2000 will open a window called “Add New Hardware Wizard” to indicate that it
found a “PCI ATM Controller” board.
3.
Click “Next” then select the bullet next to “Display a list of all the drivers….”
4.
Click Next and select the device type as “Network adapters”.
5.
Click “Next” then select “Have Disk”, Windows 2000 will display the “Install From Disk”
window. At this time insert the floppy disk or CD-ROM, which contain the drivers and
“Browse” to the desired directory, then click “OK”.
6.
New window will display the ADI AD6481 PCI NIC ADSL driver.
7.
You should see a “Copying Files” window.
8.
Windows has finished copying the files
9.
You can set the IP configuration.
10. System reboot is required to have the board and the driver fully operational.
DW-8000P
Installation Guide
10
NDIS Driver Install for Windows NT4
1.
Copy desired driver from CD-ROM to floppy disk.
2.
To install the drivers, follow the instructions below.
To install the drivers for Windows NT4:
1.
Open the Control Panel via “Start->Settings->Control Panel”
2.
Open the Network by double clicking on “Network” icon (shown below).
3.
Display the Adapters menu by selecting “Adapters”.
4. Select
“Add…” to begin installing the ADI PCI NIC PC driver.
5. Select
“Have Disk…” and type the driver you inserted the CD (for example d:) followed by
the desired subdirectory name and press ENTER. For floppy installatioin, simply press
ENTER.
6.
Select adapter “ADI NicAdsl PCI Ethernet Adapter” and press “OK”
7.
Select protocol “RFC 1483 Bridged” and press “OK”
8.
You should see “ADI NicAdsl PCI Ethernet Driver” in the Adapters menu. (See below.
What you see will differ depending on the equipment you have already installed in your
PC.)
