DW-8000P
Installation Guide
3
Determining Your Connection Address and Configuration
You will need to know the connection address and configuration for your Internet service. Find your
Internet Service Protocol below and proceed gathering the connection address and configuration. If you
are unsure or do not have all the information, please contact your Internet Service Provider (ISP).
RFC1483
- Bridged Ethernet over ATM
service requires the following information:
IP Address
.
.
.
Subnet Mask
. . .
Gateway
. . .
(Domain Name Service) DNS Host
DNS
Domain
DNS Server
. . .
VPI value
VPI = ____ (Default VPI=0)
VCI value
VCI = ____ (Default VCI=32)
ADSL Mode Type
ANSI T1.413 Issue 2
ITU G.992.1 Annex A (G.dmt)
ITU G.992.2 Annex A (G.lite)
DW-8000P
Installation Guide
4
Step 2 –
Install the ADSL modem card
Hardware Installation
WARNING!
To avoid possible damage to your
DW-8000P
card you need to use an anti-static
grounding device or hold onto the metal chassis of the PC to provide anti-static grounding.
1.
Shut down the system and switch the power
of
f.
2.
Unplug the AC power cable from the PC.
3.
Remove the cover from the PC chassis.
4.
Unscrew the “slot cover bracket” from an unused PCI slot.
5.
Insert the card into an empty PCI slot.
6.
Firmly press the DW-8000P card into the slot and secure
the card to the chassis with the chassis bracket screw.
7.
Connect one end of a phone cable to the RJ-11 port on the
DW-8000P card and plug the other end of the cable into
the ADSL data service.
8.
Replace the cover of the PC chassis
