DW-8000P
Installation Guide
5
Step3 – Install the drivers
Driver Installation and Internet Service Connection
Installing from floppy disk
The supplied CD-ROM contains both NDIS (RFC1483) and NDISWAN (PPPoATM) software drivers.
It is recommended to copy desired drivers from the CD-ROM to the root directory of a blank formatted
floppy disk for software driver installation. NDIS comes in three parts, two device drivers (ADI PCI
NIC and CommAgent) and a Connection Manager (CM). NDISWAN comes with PPP driver.
Installing latest service pack
It is important to remember to install/reinstall latest service pack for Windows whenever you are adding
components to your system since older system files may be copied back to Windows during installation.
And after that you should reboot machine again.
NOTE:
You may need the Microsoft Windows Operating System installation files (CAB files) to
complete the installation. The CAB files are contained in the Microsoft’s system CD. Some systems
may have already installed the CAB files to the hard drive, but you should have the Microsoft CD handy
just in case.
DW-8000P
Installation Guide
6
NDIS Driver Install for Windows 95/98
To install ADI PCI NIC device drivers for Windows 95/98:
1.
Start Windows 95/98 on your computer with the DW-8000P board installed.
2.
Windows 95/98 will open a window called “Add New Hardware Wizard” to indicate that it
found a “PCI ATM Controller” board.
3.
Click “Next” then select the bullet next to “Display a list of all the drivers….”
