53
THE
OTHERS
52
DVD Audio output standards
Specifications
Power
AC 120V, 60Hz
Consumed electricity
24W (supplementary 4W)
Weight
4.5kg
Dimension (WxHxD)
435mm x 93mm x 255mm
Operative temperature
+5¡C~35¡C
Installation condition
Horizontal / Relative humidity under 80%
Received channels
VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125
Signal type
NTSC COLOR
Antenna Input/output
U/V-mixed: 75½ unbalanced
VIDEO input
1.0 Vp-p unbalanced, RCA JACK
AUDIO input
-8.8dBm, RCA JACK
VHF output
3 or 4 CH
VIDEO output (common use of DVD and VCR)
VIDEO output terminal, 1.0 Vp-p unbalanced, RCA JACK
VIDEO output (DVD only)
S-VIDEO output (75½ In load Y: 1.0Vp-p, C:0.286Vp-p)
COMPONENT output (75½ In load Y: 1.0Vp-p, Pb:0.7Vp-p, Pr:0.7Vp-p)
AUDIO output (common use of DVD and VCR) Audio output terminal (2 kinds): -8.8dBm(VCR), 2.0Vrms(DVD), RCA JACK
AUDIO output (DVD only)
Analogue AUDIO output (2 CH): 2.0Vrms
Digital audio output (COAXIAL)
Playable tape
Very high dense tapes with VHS marks
Playable disc
DVD, VIDEO-CD, CD (12mm), CD (8mm), MP3, CD-R, CD-RW
Tape speed
SP: 33.35mm/s, SLP: 11.12mm/s
Playtime
SP: 2hrs, SLP: 6hrs (use of T-120 tape)
Clock display
12 hrs AM/PM
Time Recording
8 programs a year
VIDEO S/N (VCR)
Over 45dB(Standard recording)
Resolution VCR
Over 220 lines (Standard recording)
DVD
Over 500 lines (DVD Disc PLAY)
AUDIO (VCR)
Over 69dB (Hi-Fi), over 40dB (Mono)
AUDIO (DVD)
90dB
AUDIO dynamic range
90dB
Disc type
DVD
VIDEO-CD
CD
Analogue Audio output
48/96KHz sampling
44.1KHz sampling
44.1KHz sampling
Digital Audio output
48KHz sampling
44.1KHz sampling
44.1KHz sampling
Output
Before doubting about troubles (VCR)
¥ Recording a TV program is impossible.
¥ Once pressing [REC], a videotape is
ejected automatically.
¥ Timer recording of Cable TV does not
work.
¥ In spite of pressing [CHANNEL], a
channel can not be set.
¥ While duplicating, screen is not clean
and distorted.
¥ remote control does not work.
¥ Buttons on remote control do not
work.
¥ VISS index search does not work.
¥ Cable broadcasting can not be
selected.
Checks
Symptom
➤
Please check whether a channel is fixed on video. If not, you have to
turn it into ÒTVÓ by pressing [OUTPUT] button.
➤
Please check whether the timer recording info is right.
➤
Are RF cables inputted antenna connection terminal correctly?
➤
Does a CH number selected in display section appear?
➤
Please check a tab on a tape whether it is broken or not. (If it was
broken, please scotch-tape it)
➤
Check whether the screen is displayed in VCR Only Channel. Press
[OUTPUT] button in this remote controller to adjust in "General
Broadcast" condition.
➤
Is the rounded line (RF cable) connected in "ANT.IN" terminal?
➤
Please check whether the clock is right.
➤
Does the display on your video show Ò
Ó (Ready to timer recording)?
Please make it out.
➤
Please check whether the timer recording info is right.
➤
Please check a tab on a tape whether it is broke or not. (If it was
broken, please scotch-tape it)
➤
Was a cable data output code connected correctly?
➤
Were a converter manufacturer setup and output channel right?
➤
Did you enter a password? (Please cancel it.)
➤
Did you turn off your player? (Please turn it on.)
➤
You may not memorize channels.
➤
Please check your channel setting or press a number button.
➤
Some tapes or discs distributed in the market for lending is set to
prevent copy in manufacturing. These tapes cannot be duplicated in
a good condition.
➤
Battery may be weak or exhausted.
➤
A receiver of remote control may be different with a sender.
➤
In case a videotape is positioned in the beginning, ÒVISS REWÓ and
ÒREWÓ do not work.
➤
In case a videotape is positioned in the end, ÒFFÓ, ÒVISS FFÓ, ÒPLAYÓ
and ÒRECÓ do not work.
➤
Please check whether another button is pressed.
➤
Are you playing a tape that is not recorded in this recorder? (Try to
record it with the recorder.)
➤
You may start recording it in ÒREC-PAUSEÓ. Please start recording it
from stop condition.
➤
Please select ÒCABLEÓ not ÒNETWORKÓ from the ÒCHANNEL SETTINGÓ.
