Daewoo DV-K88 series Service Manual Download

Page: 23 / 129

CIRCUIT

- Case 1

TV set : Watching & receiving the normal CH.
VCR set : Power off, Input source is turner. TV set signal comes out to the decoder.

- Case 2

TV set : Watching the C+ CH which is received by itself.
VCR set : Power off, Input source is tuner, Discramble the C+ and supply it to the TV set.

- Case 3

TV set : Watching & receiving the normal CH.
VCR set : Power off, Input source is AV. TV set signal comes out to the decoder.

- Case 4

TV set : Watching the C+ CH received on itself.
VCR set : Power off, Input source is AV. Discramble the C+ and supply it to the TV set.

- Case 5

TV set : Watching & receiving the normal CH.
VCR set : Play mode. forced TV mode. TV set signal comes out to the decoder.

- Case 6

TV set : Watching the C+ CH received on itself.
VCR set : Play mode, forced TV mode. Discramble the C+ and supply it to the TV set.

- Case 7

TV set : Watching the picture which is played on VCR set.
VCR set : Play, auto VCR mode, TV set signal comes out to the decoder.

- Case 8

TV set : Watching & receiving the normal CH.
VCR set : EE, TV mode. Input source is tuner. TV set signal comes out to the decoder.

- Case 9

TV set : Watching the C+ CH received on itself.
VCR set : EE, TV mode. Input source is tuner. Discramble the C+ and supply it to the TV set.

- Case 10

TV set : Watching & receiving the normal CH.
VCR set : TV mode. No C+ Ch memory. Recording another normal CH received on the VCR set.

TV set signal comes out to the decoder.

- Case 11

TV set : Watching the C+ CH received on itself.
VCR set : TV mode. No C+ CH memory. Recording another normal CH received on the VCR set.

Discramble the C+ and supply it to the TV set.

- Case 12

TV set : Watching & receiving the normal CH.
VCR set : TV mode. C+ CH memory. Recording another normal CH received on the VCR set.

VCR tuner signal comes out to the decoder because of C+ channel memory.

- Case 13

TV set : Watching & receiving the normal CH.
VCR set : TV mode. C+ CH memory. Recording C+ CH received on the VCR set.

VCR tuner signal is discrambled and supplied to the REC path.
In this case, the C+ received on TV cannot be discrambled.

Summary of Contents for DV-K88 series


































































































































Search results

Summary of Contents for DV-K88 series

Reviews:

Related manuals for DV-K88 series

Brands by name

Popular brands

Daewoo DV-K88 series, Service Manual

Search results

Summary of Contents for DV-K88 series

Reviews:

Related manuals for DV-K88 series

Brands by name

Popular brands