Daewoo DV- K584N-SJ, Technical Manual

Page: 22 / 123

21
Cam Gear, and F/L Rack Removal
(Fig. 22)
1. Remove the cam gear
&
from the deck mechanism.
2. Remove the relay lever
^
from the main base
%
.
3. Remove the F/L rack
*
from the deck mechanism.
NOTE:
When reassembling, align the assembly as shown in
Fig. 23 & 24.
S/T Main & Sub Brakes Removal
(Fig. 25)
1. Unhook the main brake spring
!
from the T main brake
lever
#
.
2. Disconnect the main brake lever assembly
@
and T main
brake lever
#
from the main base
*
.
3. Unhook the s sub brake spring
$
from the main base and discon-
nect the s sub brake lever assembly
%
from the main base
*
.
4. Unhook the T sub brake spring
^
from the main base and discon-
nect the T sub brake lever assembly
&
from the main base
*
.
Tension Band Assembly Removal
(Fig. 26, 27)
1. Remove the tension spring
@
from the main base
!
(Fig. 26).
2. Turn the deck mechanism upside down (Fig, 27).
is facing down (Fig. 27).
3. Release the tab of the hook "A" and separate the tention band
assembly (3) (Fig. 27).
NOTE:
• After reassembling, adjust the position of the tension pole as
shown in Fig. 28.
• Avoid getting grease or oil on the felt section of the band
brake.
MECHANICAL DISASSEMBLY (Continued)
Fig. 23- L/C Bracket Assembly Alignment
Fig. 24- Cam Gear/F/L Rack Alignment
@
!
#
&
^
%
$
*
Fig. 25- Main Plate Removal
@
#
!
Fig. 26- Tension Band Assembly Removal (I)