Daewoo DV- K504N-SJ, Technical Manual

Page: 23 / 123

22
Capstan Motor Removal
(Fig. 29)
Remove three (3) screws and remove the capstan motor.
Idler Plate/Reel Table Removal
(Fig. 30)
1. Remove one
!
polywasher
!
from rhe idler plate
@
and
remove the idier plate
@
from the main base.
2. Remove the reel tables
#
and the two
@
polysliders
$
from the deck mechanism.
FE Head Removal
(Fig. 31)
Remove one (1) screw (1) and lift the FE head (2) from the main
base.
Reel Gear Total Ass'y and Connect Plate
Removal
(Fig. 32)
1. Turn the deck mechanism upside down and remove one
!
polywasher
!
.
2. Release the tab "B" of the main base and part the reel gear
total ass'y
@
from the main base.
3. Push the connect plate
#
to the left direction and separate it
from the main base.
NOTE:
• When removing the connect plat with the the F/L rack installed,
take care not to damage/bend the connect plate.
• When assembling or disassembling, take care not to get oil or
grease on the reel belt.
Fig. 27- Tension Band
Assembly Removal (II)
Fig. 28- Tension Band
Assembly Alignment
With Main Base
Fig. 29- Capstan Motor Removal
!
#
@
$
Fig. 30- Idler Hate/Reel Table Removal
!
@
Fig. 31- FE Head Removal
!
@
#
Fig. 32- Reel gear total ass'y and Connect Plate Removal
MECHANICAL DISASSEMBLY (Continued)