Press the OK button to display the INSTALL menu.
•
Make sure the country listed against 'ATSS' is the
country in which you live (GB stands for Great Britain).
If you need to change the country, press either
volume (
)button until the correct abbreviation
shows.
1 Make sure you have followed steps 1 to 5 under 'Setting up your television' and read 'Stand-by mode'.
2 If you have a video recorder connected with the aerial lead, switch it on to produce a test picture, or play a
video tape.
3 If you have a satellite receiver (or any other piece of equipment as well as the video recorder) connected
with the aerial lead, make sure that mains power is supplied to it and that it is on stand-by.
4 Switch on. (If the screen does not light up, please check previous sections '3 Supply power', '4 - Switch on'
and 'Stand-by mode'.)
7
Tuning in the programmes
Before you start
Press the MENU button to make the picture, sound,
features and install boxes appear on the screen.
•
Whenever a menu is displayed, if you do not press a
button within 30 seconds the menu will go off.
•
You might already find a menu prompting you to set
the on-screen menu language. In this case, press the
volume increase button to change the setting (GB
stands for Great Britain). Press the MENU button to
finish.
PR
PR
Press the volume increase button and
then the PR down button to move the
green highlight to 'INSTALL'.
PICTURE
SOUND
FEATURES
INSTALL
PICTURE
SOUND
FEATURES
INSTALL
INSTALL
ATSS GB
EDIT
SYSTEM GB
CHANNEL C55
FREQ 743.25
NAME BBC1
PROGRAM 01
STORE TO
01
V
Position
CB
Adjust
W
OK Access
MENU Exit
PR
PR
PR
PR
NORMAL/OK
PR
PR
PR
PR
1
menu
3
OK
2
volume increase, PR down
