•
Remember if you do not press a button within 30 seconds the menu will go off.
•
At any time you can press the MENU button repeatedly to return to normal viewing.
‘PR’ is the programme number under which you store a broadcast
channel.
‘NAME’ is either read automatically from the broadcast or created by you.
‘CH’ is the broadcast channel number
‘SKIP’ - see below
Move a channel
When the channel is not on the programme number you want it on, you
can move it.
1. Press the PR buttons to green-highlight the channel you want to
move.
The picture for that channel will show beehind the menu.
2. Press the green MOVE button on the remote control, the highlight changes
to red and the green block on the screen is re-labelled Confirm.
3. Press the PR buttons to move the red highlight onto the programme
number where you want to put the channel.
4. Press the green MOVE button to finish the move.
Delete a channel
1. Press the PR buttons to green-highlight the channel you want to delete. The picture for that channel will show
behind the menu.
2. Press the yellow DELETE button on the remote control. The highlight change momentarily to red and the
program list shifts down to occupy the vacant slot.
Skip
You set the tick mark under ‘SKIP’ so the programme number is not recalled when you press the PR buttons to
select a channel.
1. Press the PR buttons to green-highlight the programme number where you want to set or remove the tick
mark. The picture for channel will show behind the menu.
2. Press the red SKIP button on the remote control either to set the tick mark or to remove it.
13
Editing programmes
INSTALL
ATSS GB
SYSTEM GB
CHANNEL C55
FREQ 743.25
NAME BBC1
PROGRAM 01
STORE TO
01
EDIT
PR
NAME CH SKIP
07
--------
C37
06
--------
C64
05
CH5
C59
04 CH4 C62
03 ITV
C55
O2 BBC2
-
---
01 BBC1 -
---
V
Position
CB
Adjust
W
OK Access
MENU Exit
V
Position
Move
W
Delete
MENU Exit
Skip
Move the highlight onto
‘EDIT’
Press the OK button and the
edit menu will appear.
EDIT
PR
PR
PR
PR
NORMAL/OK
PR
PR
PR
PR
PR
PR
PR
PR
NORMAL/OK
Press the menu button.
Select ‘INSTALL’
Press the OK button.
