Daewoo DTD 5000, User Manual

Page: 52 / 108

52
USER MANUAL
EN
DTD 5000
icon not scrolling
• Try cleaning the charging contacts.
• Check that the mains power is correctly connected.
You hear the busy tone when you press
• Make sure the handset is in range of the base.
• Another handset registered to your phone base may be on the line.
No Caller Display number/name displayed
• Have you subscribed to a Caller Display service from your network provider, see page 46.
• The caller may have withheld their number.
• An exact name/number match was not found in your phonebook. Check that you have stored
the full STD dialling code.
Cannot register a handset to a base
• You can register a total of 5 handsets to your base and you can register your phone handset to
up to 4 bases. Check that you have not exceeded the limits.
• Check that you have entered the correct PIN number (default PIN 0000).
• Check that you are at least one metre away from other electrical equipment to avoid
interference when registering.
Base unit does not ring, but the lights are on
• Have you connected the telephone line correctly?
• Is the base ringer set to off ?
• You may have a faulty line or socket. Try using another socket or line. Call your phone operator
if you still experience problems.
Base charging light not working
• Try cleaning the charging contacts on the base.
• Check that the mains power is correctly connected.
Buzzing noise on my phone or on other electrical equipment nearby
• Sometimes your phone can interfere with other electrical equipment if it is placed too close.
It is recommended that you place your phone base at least one metre away from electrical
appliances or metal obstructions to avoid any risk of interference.