Checking the
Current Input Signal
• Used to check the
INPUT signal mode,
current time,
resolution, channel,
etc.
Checking the Current Input Signal
58
Press the DISPLAY Button.
• Press the [DISPLAY] button on the Remote Control.
1
1. If you watch Component, PC, or HDMI:
Displays which input terminal is used, and indicates the input signal mode.
Indicates the mode and current time.
Component 1
PM 12:00
Component 1
PM 12:00
2. If you watch TV:
Display the channel number.
Indicates the current sound state and time.
CH 22
Mono PM 12:00
3. If you watch VCR image:
Displays the program number and input terminal, which is used.
Indicates the mode and current time.
AV1
PM 12:00
NOTES:
1) “1920 x 1080” displayed in the INPUT signal is not the
resolution of the set, but the signal that is sent by the Digital
Broadcasting Receiver.
- Press the [DISPLAY] button on the remote control, then displays basic informations of the current input signal,
Under this state, pressing the [DISPLAY] button once more, additional informations about the current input signal
will be displayed on the OSD.
Displays te video system of TV signal.
Video NTSC M
H : 1920
V : 1080
Indicates the horizontal and vertical resolution of the current input signal
H : 1920
V : 1080
Displays the video system of input signal
Video NTSC M
