10
1. Connect throttle wire with carburetor. lnsert the cable to the end of adjus-
ter fix the throttle cable by tightening M3 screw. (Tightening torque: 0.4 - 0.8
N.m.)
2. Make sure the TOPPER-PLATE of carburetor moves to contact with
DLING ADJUST SCREW and the WING-ARM of carburetor moves to contact
with ULL ON STOPPER by gripping throttle lever.
CONNECTING SWITCH WIRES
Connect the switch wires between the engine and the main unit. Pair the
wires of the same color.
SUSPENSION POINT
NOTE
Be the SUSPENSION POINT in the location of the arrow mark.
INSTALLING HANDLE
NOTE
The handle is put during the arrow mark.
Mount the handle to the shaft tube and suspension point it
at a location that is comfortable to you.
Insert the grip to the shaft tube. Fasten the clamps with screws.
lnstall the J-shaped handle to the shaft tube and clamp at a position
best for your job.
JOINT ATTACHMENT
lnsert the attachment to the main shaft. Ighten the knob bolt securely.
