background image

SETUP

25

24

Initial Setup

Initial Setup

1

Press [SETUP].  The Setup menu appears.

While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.

2

Use [

œ

/

] to select ‘Preferences 

‘.

3

While ‘Preferences 

‘ is selected, press [

] to select ‘Audio‘.

4

Press [

]. The ‘Audio‘ submenu is displayed.

Digital Output
1

Use [

/

] to select ‘Digital Output‘ while the Audio submenu is

displayed.

2

Press [

] to go to the second level.

3

Use [

/

] to select the desired digital output type.

4

Press [ENTER] to confirm your selection.

5

Press [SETUP] to exit the menu.

Off

No signal will be output from the Digital Audio Out jacks.

Bitstream

Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby
Digital or DTS decoder).

LPCM

Select when connected to a digital amplifier. The DVD RVCR's digital audio signal will be output in the
PCM format when you play a DVD recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD
is recorded with a DTS sound track then no sound will be heard.

Dynamic Range

While watching DVD movies, you may wish to compress the dynamic range
of the audio output (the difference between the loudest and quietest
passages). This allows you to listen to a movie at a lower volume without
losing clarity of sound. 
Set 'Dynamic Range'to anymode you want for this effect.
Follow the same procedure as ‘Digital Output‘ to set the Dynamic Range.

‘Preferences’ / Audio Settings

Preferences

Video

•Audio          

Digital Output

BItstream

Parental Ctrl

Dynamic Range

Auto Settings
VCR
Modulator Out

Choose

OK

Exit

ENTER

SETUP

œ √


Preferences

Video
Audio

Digital Output

Parental Ctrl

Dynamic Range

–     –  FULL

Auto Settings

–     –  

VCR

–     –  1/2

Modulator Out

–     –  
–     –  OFF

Choose

OK

Exit

ENTER

SETUP

œ √


Preferences

Video
Audio                        • Digital Output

Off

Parental Ctrl

Dynamic Range

Bitstream

Auto Settings

LPCM

VCR
Modulator Out

Choose

OK

Exit

ENTER

SETUP

œ √


Set Parental Level

The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to have
certain discs played with alternative scenes. You can set the parental level from ‘ADULT’ to ‘KID SAFE’.

1

Press [SETUP].  The Setup menu appears.

While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.

2

Use [

œ

/

] to select ‘Preferences 

‘.

3

While ‘Preferences 

‘ is selected, press [

] to select ‘Parental

Ctrl‘.

4

Press [

]. The ‘Parental‘ submenu is displayed.

5

The Password Input dialog will appear. Enter a 4-digit password using the [0-9]
buttons. If this is the first time you have entered a password, you will be prompted to
enter the password again to confirm it.

After setting the password, press [ENTER].

6

Enter your new password.

7

Use [

/

] to select the desired parental level and press [ENTER] to

confirm. 

Adult to Kid Safe : 

Some discs contain scenes not suitable for children.

If you set a rating for the DVD RVCR, all scenes with the same
rating or lower will be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc. The alternative
must have the same rating or a lower one. If no suitable alternative is
found, playback will stop. You must enter the 4-digit password or change the rating level in order to play
the disc.

8

Press [ENTER] to confirm your rating selection, then press [SETUP] to exit the menu.

The initial password is ‘3308‘. You must enter this password before you can
change the Parental Level.

‘Preferences’ / Parental Controls

Preferences

Video
Audio                       

•Parental Ctrl

Parental

Auto Settings

Password

VCR
Modulator Out

Choose

OK

Exit

ENTER

SETUP

œ √


Preferences

Video
Audio                       
Parental Ctrl              •Parental
Auto Settings

Password

VCR
Modulator Out

Choose

OK

Exit

ENTER

SETUP

œ √


1 Kid Safe
2 G
3 PG
4 PG-13
5 PGR
6 R
7 NC-17

8 Adult

Preferences

Video
Audio                       
Parental Ctrl 

Parental

Auto Settings

Password

VCR
Modulator Out

Choose

OK

Exit

ENTER

SETUP

œ √


Input Password

Password

Input digits
Select

OK

OK

Cancel

ENTER

0-9

œ √


1 Kid Safe
2 G
3 PG
4 PG-13
5 PGR
6 R
7 NC-17

• 8 Adult

Preferences

Video
Audio                       
Parental Ctrl 

Parental

Auto Settings

Password

VCR
Modulator Out

Choose

OK

Exit

ENTER

SETUP

œ √


1 Kid Safe
2 G
3 PG
4 PG-13
5 PGR
6 R
7 NC-17

• 8 Adult

Input Password

New Password

Input digits
Select

OK

OK

Cancel

ENTER

0-9

œ √


Summary of Contents for DF-4501P

































Reviews: