Daewoo DDT-21H9ZZF, Service Manual

Page: 57 / 83

-56-
Service Manual CP-099F
5. Frame Assembly Up/Down
Put the Base Main face down(Bottom Side)
1) Release the Screw(S4)
2) Unlock the Locking Tab(L3) in direction of arrow
and then lift up the Frame Assembly Up/Down to
separate it from the Base Main.
¥ When reassembling move the Guide Up/Down in
direction of arrow(C) until it is positioned as Fig.(C).
¥ When reassembling insert (A) portion of the Frame
Assembly Up/Down in the (B) portion of the Guide
Up/Down as Fig.(B)
6. Belt Loading(Fig. 5-11-4)
Put the Base Assembly Main on original position
(Top Side)
7. Gear pulley (Fig. 5-11-4)
1) Unlock the Locking Tab(L4) in direction of arrow(B)
and then separate the Gear Pulley from the Base
Main.
8. Gear Loading (Fig. 5-11-4)
9. Guide Up/Down (Fig. 5-11-4)
1) Move the Guide Up/Down in direction of arrow(A)
as Fig.(A)
2) Push the Locking Tab(L5) down and then lift up the
Guide Up/Down to separate it from the Base Main.
When reassembling place the Guide Up/Down as
Fig.(C) and move it in direction arrow(B) until it is
locked by the Locking Tab(L5). And confirm the Guide
Up/Down as Fig.(A)
10. PWB Assembly Loading
Put the Base Main face down(Bottom Side)
1) Release 2 Screws(S5)
2) Unkool the Loading Motor Connector (C2) from the
Hook (H1) on the Base Main.
3) Unlock 2 Locking Tabs(L6) and separate the PWB
Assembly Loading from the Base Main.
11. Base Main(Fig. 5-11-4)
[Note]
[Note]
[Note]
[Note]
[Note]
Fig. 5-11-4
GEAR LOADING
GEAR PULLEY
BELT LOADING
PWB ASSEMBLY LOADING
GUIDE UP/DOWN
BASE MAIN
GUIDE UP/DOWN
GUIDE UP/DOWN
FRAME ASSEMBLY
UP/DOWN
BASE
MAIN
GUIDE UP/DOWN
(L6)
(L6)
(L4)
(L6)
(S5)
(H1)
(S4)
(A)
(C)
(A)
(L5)
(B)
Fig.(C)
Fig.(5)