background image

 

Noise 

1>. Check if lens is normal. Change 
another lens; 
2>. Check if power wire of camera is OK. 

TFT-LCD is too dark 

1>. Check if the power, resistance and 
audion of LCD back light circuit are OK; 
2>. Check if LCD is OK. 

TFT-LCD displays 
white image 

1>. Check if LCD interface is inserted to 
the end or the interface is cold soldering;. 
2>. Check if each group of power +5VL, 
+15VL, D3.3V, -7.5VL of LCD are 
normal; 
3>. Check if the contact between I/O 
board & MCU connecting U model board 
and interface is OK.   

TFT-LCD displays 
menu without image 

1>. Check if lens shutter and aperture are 
opened; 
2>. Check if CCD flex board installation 

is OK and flex board is broken; 

3>. Check if CCD and related 
components are OK; 
4>. Check if each voltage of CCD is OK. 

TFT-LCD color 
deviation/aberration 

1>. Check if CCD flex board installation 

and flex board are OK; 

2>. Check if CCD is short-circuit, cold 
soldering or insufficient soldering; 
3>. Check if U5 is cold soldering, 

insufficient soldering or NG.  

TV displays nothing 

1>. Check the TV interface is OK; 
2>. Check if camera base J4 soldering is 

OK; 

3>. Check if J602 on I/O board is OK, U 

model flex board is OK and contact is 
OK. 

Display and 
image system 

TV playback without 
sound/ noise/ voice too 
low/ too high 

1>. Check if base TV interface is OK; 
2>. Check if microphone wire soldering is 

OK; 

3>. Check if J602 on I/O board is OK, U 

model flex board is OK and contact is 
OK. 

Charging 
triggering 
system 

Charging fail/ fail to 
charge fully   

1>. Check the U805 and surrounding 

components and voltage are normal; 

2>. Check if Q808/ D807/ D808/ T801/ 

R847 and big capacitor are normal;   

3>. Check if R480/ R841/ R842/ R843/ 

R844 are normal; 

4>. Check if big capacitor is OK or leaks 

liquid. 

Summary of Contents for DDC500














Reviews: