7
5. PROTECTIVE DEVICE
Special instruction concerning protective device.
(1) When the water in the barrel is full, the device begins to work.
The suction power will vanish at this moment. The machine will make some noise which indicates the
motor is running at a high speed.
Under this circumstance, you should cut off the electricity, and clean out the water. Then equip the
machine and turn it on, it will begin to work normally.
(2) When the machine was overturned, the device will become to work. You should cut off the electri-
city and make it upright, then turn on the machine.
(3) When the device is working, the motor will be damaged and cause fire if you use the machine.
Under this circumstance, you should stop using and clean out the water, then you can begin to use it.
6. MAINTENANCE
(1) Barrel Cleaning
* After working or when the barrel is full of dust which causes suction decrease considerably, you
should cut off the electricity and clean the dust away from the barrel.
1) Unfasten the locking knob, lift up the top cover.
2) Take off the filter bag, clean the dust away in the dust barrel.
3) Install the filter bag back and place the top cover.
(2) Filter bag cleaning
* Filter bag should be washed by clean and warm water when it is covered with dust. If necessary,
you can use litmus less scour to wash.
1) Take off the filter
2) Wash
3) Dry
7. TECH-DATA
MOTOR
Power: 1200 W
EQUIPMENT
Vacuity:
≥
20 Kpa
Airflow rate:
≥
1.5m3/min
Power cord length: 4.5 m
Suction hose diameter: 32 mm
Suction hose length: 1.5 m
Tank: Stainless steel
Tank capacity: 30 L
SOUND AND NOISE
Sound power level:
≤
78dB (A)
ACCESSORIES
1 pc cloth filter, 1pc sponge
filter, 1pc 1.5 hose assembly,
1pc round brush, 1pc floor
brush, 2 plastic tubes
