Daewoo D20-2, Specifications Systems Operation Testing & Adjusting Disassembly & Assembly

Page: 2 / 26

Important Safety Information
Most accidents involving product operation, maintenance and repair are caused by failure to observe
basic safety rules or precautions. An accident can often be avoided by recognizing potentially
hazardous situations before an accident occurs. A person must be alert to potential hazards. This
person should also have the necessary training, skills and tools to perform these functions properly.
Improper operation, Iubrication, maintenance or repair of this product can be dangerous and
could result in injury or death.
Do not operate or perform any Iubrication, maintenance or repair on this product, until you
have read and understood the operation, Iubrication, maintenance and repair information.
Safety precautions and warnings are provided in this manual and on the product. If these hazard
warnings are not heeded, bodily injury or death could occur to you or other persons.
The hazards are identified by the "Safety Alert Symbol" and followed by a "Signal Word" such as
"WARNING" as shown below.
The meaning of this safety alert symbol is as follows :
Attention! Become Alert! Your Safety is Involved.
The Message that appears under the warning, explaining the hazard, can be either written or
pictorially presented.
Operations that may cause product damage are identified by NOTICE labels on the product and in
this publication.
DAEWOO cannot anticipate every possible circumstance that might involve a potential hazard. The
warnings in this publication and on the product are therefore not all inclusive. If a tool, procedure,
work method or operating technique not specifically recommended by DAEWOO is used, you must
satisfy yourself that it is safe for you and others. You should also ensure that the product will not be
damaged or made unsafe by the operation, Iubrication, maintenance or repair procedures you
choose.
The information, specifications, and illustrations in this publication are on the basis of information
available at the time it was written. The specifications, torques, pressures, measurements,
adjustments, illustrations, and other items can change at any time. These changes can affect the
service given to the product.
Obtain the complete and most current information before starting any job. DAEWOO dealers have
the most current information available.
1 of 29
WARNING