Daewoo D1146, Maintenance Manual

Page: 81 / 147

D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
77
Printed in Jan. 2001 PS-MMA0415-E1A
z
Install the snap rings and check to see
that it is securely assembled.
z
Install the piston ring in the piston using
piston ring pliers.
z
Identify the mark " Y " or " TOP " on the
ring end to prevent the top and bottom
of the piston ring from being
interchanged and make the marked
portion face upward.
(The surface marked as “ Y ” is upper
surface.)
z
Adjust the angle among individual piston
ring gaps to 90
°
and fit a piston
assembling jig onto the piston, Use care
not to match the ring gaps with the pin
direction.
z
Install the bearing by aligning it with the
connecting rod key groove and apply oil
to the bearing and piston.
z
Position the valve seating surface
toward the tappet hole and insert the
piston with hand.
CAUTION :
Tappet hole
Valve seating
G1055
45
°
45
°
Piston pin
Piston
2nd ring gap
Top ring gap
90
°
Oil ring gap
Piston
Top ring
Second ring
Oil ring