4
Information:
We recommend a high-speed SD card of 6MB/s (class 6) or higher for best results. This
camera will operate with memory cards of up to 64Gb in capacity.
Powering Up Your Camera
1.
Power On:
Press and hold the
Power/Mode Button
(2) for approximately 3 seconds
.
2.
Power Off:
Press and hold the
Power/Mode Button
(2) for approximately 3 seconds
.
Camera Modes
Briefly press the
Power/Mode Button
(2) on the front of the camera to step through the five
camera modes:
1.
Video Recording
–
Record continuous video.
2.
Still Photographs
–
take single photographs.
3.
Time Lapse Video
–
Records a time lapse video.
4.
Playback
–
Playback photo and videos.
5.
Settings
–
Adjust the camera settings.
Video Recording Mode 1
Briefly press the
Power/Mode Button
(2) on the front of the camera until the camera is in video
recording mode:
1.
Insert a Micro SD memory card (not supplied)
into the
Micro SD Card Slot
(11) on the side of
the camera as shown left.
2.
To remove the card, gently press the card in
and it will then automatically pop out.
Video Mode
Resolution
Memory
Remaining
SD Card
Inserted
Battery
level
Zoom Level
Date & Time
Microphone (on)
Briefly press the
OK Button/Shutter
button (6) to start the
camera recording, press the button again to stop recording.
The time of the length of the recording will be shown at the
bottom centre of the screen next to a flashing red dot to
show the camera is recording. The
Busy Indicator
(1) will
also flash whilst recording (arrowed right).
