English-8
English - 7
Display horizontal & vertical frequency
and polarity.
STATUS
Select language for OSD (5 languages).
Reset the screen to the Factory Preset
Display Settings.
LANGUAGE
RECALL
Self Diagnosis
When the monitor doesn’t display, if you press any key, Self
Diagnosis screen is displayed. Self Diagnosis function checks
if the status of the monitor is No Signal or Out of range.
No Signal screen is displayed when
the D-Sub signal connector is not
connected or the status of the monitor
is on DPMS mode.
Out of Range screen is displayed
when the applied frequency is under
or over normal range.
Normal range
H : 30 - 54 KHz
V : 50 - 160 Hz
Adjust the vertical picture moire
cancellation.
V. MOIRE
Adjust the horizontal picture moire
cancellation.
H. MOIRE
ICON CONTROL FUNCTIONS
ICON CONTROL FUNCTION
Adjust the width (horizontal size) and the
height (vertical size) of the display.
Degaussing keeps the monitor free from
unwanted magnetism that can result in
color impurity.
H. SIZE &
V. SIZE
DEGAUSS
OSD Functions
Adjust the left and right margins for more
convex or more concave margins.
Adjust the trapezoid of the screen by
moving the lines inward or outward.
PINCUSHION
TRAPEZOID
Choose different preset color
temperatures or set your own customized
color parameters.
Adjust the red gain.
Adjust the position of the display
horizontally (left or right) and vertically
(up or down)
.
H. CENTER &
V. CENTER
COLOR TEMP
RED GAIN
Adjust the blue gain.
BLUE GAIN
Adjust the parallelogram when the screen
is leaning left or right.
Adjust the pin corner top when the top
sides of the screen are bowed (Optional).
Adjust the pin corner bottom when the
bottom sides of the screen are bowed
(Optional).
PARALLELOGRAM
T. PIN CORNER
B. PIN CORNER
Adjust the side balance when the sides of
the screen are bowed towards left or right.
PIN BALANCE
Adjust the green gain.
GREEN GAIN
