DAEWOO ELECTRONICS DVR-S04 User Manual Download Page 24

Page: 24 / 32

RECORDING

Timer Recording

Even if a Timer Recording is set, the DVD RVCR will not record if:

•  No disc is loaded.
•  A non-recordable disc is loaded.
•  DISC Lock is set to ON in the DISC Settings menu; see page 46.
•  There are already 49 titles recorded on the disc.

You cannot enter a Timer Recording if:

•  A recording is already under way.
•  The start time has already passed.
•  Eight Timer Recordings have already been set.

If two or more Timer Recordings overlap:

•  The earlier program takes priority.
•  When the earlier program finishes, the later program starts.
•  If two programs are set to start at exactly the same time, the program entered first takes priority.

Confirmation is not possible when:

• The DISC Protect setting is set to ON.
• There are already 49 titles recorded on the disc.

If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.

Timer Recording Troubleshooting

You can clear a Timer Recording any time before the recording actually starts.

• Use [

…†

] to select the program you want to erase on the Timer Recorder List, then press [ENTER] to

modify it. Use [

…†

] to select 'Delete' then press [ENTER].

Canceling a Timer Recording

After a Timer Recording has started, you can still cancel the program by pressing and holding [STOP] for 3
seconds.

Stopping a Timer Recording in Progress

Recording Priority

• Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manual

recording. During manual recording Timer Recording or OTR will be ignored.

The Timer Recording function allows you to record up to 8 programs within a period of one month.

Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape.

Press [TIMER].

The ‘Timer Recording’ menu appears.
Use [

…†

] to move to a timer recording slot, and press [ENTER] to modify it.

If you did not set the clock on the DVD RVCR, you must do so before
programming a timer recording.

• Media - Choose desired media (DVD or VHS) using [

…†

• Ch. – Choose the desired channel, or one of the external inputs from which

to record.

• Date – Choose a date up to 1 month in advance, or select a daily or weekly

program.

•  Start Time – Set the recording start time.
•  End Time – Set the recording end time.
•  Mode – Choose a Record mode.

DVD: HQ, SP, SLP or EP
VCR: SP, SLP

Enter the necessary information for your Timer Recording(s).

•

œ √

– Moves the cursor left/right.

•

…†

– Changes the setting at the current cursor position.

•  Press [SETUP] to exit the Timer Record menu.
•  Press [ENTER] after filling in all the program information.
•  Press [TIMER] to display the Timer Record List.

Press [ENTER] to save the program.

The Timer Record List will appear.

Press [SETUP] to exit the Timer Record List.

Timer indicator will light or blinking. Power Off the DVD RVCR to start

the Timer Recording.

Note

• The Timer indicator lights on the front panel display when the DVD RVCR is ready for the Timer

Recording.

• The tape timer indicator is blinking if any of the following meets if no recordable tape is inserted.

Both the disc and tape timer indicators are blinking if tape and disc timer recordings are overlapped.

• The DVD RVCR will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Use

the [AUDIO] button to set the audio before switching the DVD RVCR to Standby mode.

• The DVD RVCR will automatically power off when the Timer Recording ends.
• There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings

are set to record sequentially (one right after the other), the very beginning of the later program may not be
recorded.

Timer Recording

CH No. Date Start End Mode

----

--/-- --:--

--:--

---

----

--/-- --:--

--:--

---

----