![background image](http://html1.mh-extra.com/html/daelim/besbi-sc125/besbi-sc125_service-manual_3160979101.webp)
CAMSHAFT ASSEMBLY
Apply engine oil to the rocker arm shaft, and assemble
the rocker arm to the camshaft holder.
Tighten the rocker arm shaft with 5mm bolts, and align
the bolt hole of the camshaft holder with the fitting side
of the rocker arm shaft.
Check the camshaft assembly for abnormal condition,
and place it on the cylinder head.
Put the cam chain on the cam sprocket.
Slowly rotate the crankshaft counterclockwise, and
align the T mark of the flywheel with the index mark
of the RH. crank case cover.
CAUTION
Take precautions not to allow the cam chain to come
off the camshaft timing gear while turning the
camshaft.
9-13
CYLINDER HEAD / VALVES
Summary of Contents for BESBI SC125 -
