DAELIM BESBI SC125 -, Service Manual

Page: 57 / 188

6-1
ENGINE REMOVAL
6. ENGINE REMOVAL
SERVICE INFORMATION 6-1
ENGINE REMOVAL 6-2
SERVICE INFORMATION
GENERAL SAFETY
NOTE
Use a jack to remove or install the engine. Support the motorcycle with a jack firmly, taking precautions not to
damage the frame, engine, cable or harness.
Attach tape to the frame to protect it during the engine removal or installation.
The following works can be carried out without removing the engine from the vehicle body.
-TRANSMISSION SECTION 11
-STARTING CLUTCH SECTION 8
-OIL PUMP SECTION 2
-A.C. GENERATOR SECTION 8
-STARTER MOTOR SECTION 17
-KICK STARTER/ CONTINUOUSLY VARIABLE TRANSMISSION SECTION 7
-CYLINDER HEAD/ CYLINDER/ PISTON SECTION 9,10
-EX. MUFFLER SECTION 4
-CARBURETOR SECTION 5
-REAR SWING ARM SECTION 13
Items to be worked after removing engine.
-CRANKSHAFT, CRANKSHAFT BEARING, CRANK CASE BEARING
Engine oil capacity : 0.9 - when disassembled.
TORQUE VALUES :
ENGINE HANGER BOLT (FRONT) : 2.7 f m
(REAR) : 3.5 f m