Daedong KIOTI DK4510 Manual Download

Page: 120 / 188

dk4510 / dk5010 / dk5510

td2O634A

DRAwbAR AND TRAILER

(1) draw bar

DIsMOuNTINg THE IMPLEMENT

1. park the tractor with the implement

on the level ground and lower the

implement all the way down. install

the implement support as needed.

2. disconnect the top link and lower

links from the implement by re-

moving the pins.

3. be sure to insert the set pins, lynch

pins and snap pins back to the im-

plement securely to keep those safe.

4. stop the engine and move the re-

mote hydraulic control lever back

and forth to release the hydraulic

pressure in the system before dis-

connecting hydraulic couplers.

5. put the top link back to its hook.

hold both lower links together with

a rubber band. otherwise, the low-

er links can contact with rear tires

and cause damage to the lower

links and tires while driving.

td2O635A

TYPE 1 (standard for Eu market)

TYPE 3

(1) Adjustable height hitch (optional)

td2O634A

TYPE 4 (standard for the other market)

td2O636A

TYPE 2

TD200(DK4510,5010,5510-SA)-동남아향-6 6

2017-02-07 오전 8:40:38

Summary of Contents for KIOTI DK4510





























































































































































































Search results

Summary of Contents for KIOTI DK4510

Reviews:

Related manuals for KIOTI DK4510

Brands by name

Popular brands

Daedong KIOTI DK4510, Manual

Search results

Summary of Contents for KIOTI DK4510

Reviews:

Related manuals for KIOTI DK4510

Brands by name

Popular brands