Daedong KIOTI DK4510, Manual

Page: 147 / 188

57
7
-
17
maintenance
3. to drain the used fluid, place the
oil container under the transmis-
sion case and remove the drain
plug to drain used fluid.
If the fluid does not flow out freely,
unscrew the breather plug on the
side of the hydraulic cylinder on
the left of the top link bracket to
facilitate drainage. (refer to next
page) reinstall the drain plugs se-
curely afterward.
(1) Drain Plug
4. unscrew the fluid filter from the
rear right section on the tractor us-
ing a filter wrench.
td2O709s
(1) oil Dipstick (2) oil filler Plug
(a) oil level is acceptable within this range
5. Apply a thin film of clean oil onto
the O-ring of a new filter.
6. Tighten the filter until it touches the
mounting surface. then, tighten
the filter for a half turn further with
a hand.
7. After installing a new filter, run the
engine for a few minutes and stop
it.
8. check the oil level again and add
more oil to the specified level.
td2O704A
TD200(DK4510,5010,5510-SA)-동남아향-17 17 2017-02-08 오전 9:03:16