Daedong KIOTI DK4510, Manual

Page: 111 / 188

5
5
-
opERATIoN
DRAfT CONTROl (If APPlICAblE)
(1) draft control lever
(A) lowering
1. The draft control function is used
to prevent the wheels from rotating
idle and the engine from stopping
due to excessive draft load when
the tractor is used for work which
requires a lot of draft, such as
plowing.
111
A A
td2O522A
(1) Top link
2. The draft function is activated
when the top or middle hole on the
top link of the 3-point hitch is used.
The top hole is for sensitive draft
control.
3. To keep the plowing depth shal-
low, put the draft control lever to
the rear (Shallow) position. The
plowing depth tends to become
deeper naturally by outer condi-
tions. When the load increases by
the increase of the plowing depth
while the draft control lever is set
to the “Shallow” position, the plow-
ing depth is maintained as shal-
low because the reaction force is
transferred to the internal system
via the top link and the lifting arm
is automatically lifted.
4. To keep the plowing depth deep,
put the draft control lever to the
front (deep) position.
5. The position of the draft control
lever should be different based
on the condition of soil to keep
the plowing depth constant. When
working on a new field, it is recom -
mended to put the draft control
lever to the proper position for the
desired plowing depth and lock the
lever with the lock bolt.
6. When using an implement which
requires no draft function, such as a
rotary tiller and mower, use the bot-
tom hole on the top link and put the
draft control lever in any position.
td2O516s
TD200(DK4510,5010,5510-SA)-동남아향-23 23 2017-02-07 오전 9:37:22