Notes on Using Modscan
This is not a manual of Modscan, but only a short note describing its manual commands capability.
Most users are familiar with Modscan
ʼ
s ability to read and continuously poll a designated device using Modbus
commands 1 to 4. But in addition, Modscan also has the ability to issue other commands as well.
For the CC1000, function code 5 and 16 needs to be issued as well. To issue them, first make sure that the connection
has already been established and running then go to the menu and run the dialog box “User Defined Command String”
from [Setup->Extended->User Msg] as shown in the screen captures below:
Notes on Using Modscan
CC1000 Modbus Reference 2.10e
!
46/122