Important:
•
Installer:
For safety reasons and to minimize problems, read these
Installation Instructions
completely and carefully
before starting the installation process. Leave these installation instructions with the consumer.
Write the data-plate information (model no., serial no.) in the Use and Care Manual before you install the unit.
•
Customer:
Keep these
Installation Instructions
for reference and the local electrical inspector’s use.
If You Need Help…
…with questions or installation problems, contact your Dacor dealer or
the Dacor Customer-Service Team. For under-warranty repairs to Dacor
appliances, call the Dacor Distinctive Service line. When you call, be prepared
with the appliance’s model and serial number. (See the appliance’s data plate.)
Dacor Customer Service Team
Phone: (800) 793-0093 x2813 (USA, Canada)
Mon–Fri 6:00 a.m.–5:00 p.m. Pacific Time
Website: www.dacor.com
Dacor Distinctive Service (under-warranty repairs only)
Phone: (800) 793-0093 x2822 (USA, Canada)
Mon–Fri 6:00 a.m.–5:00 p.m. Pacific Time
Appliance Data Plate
This label contains the model and serial number, and electrical requirements.
The data plate is inside the hood above the filters on the chassis’ back wall.
(Remove the filters to view the data plate.)
All specifications are subject to change without notice. Dacor
assumes no liability for changes to specifications.
© 2016 Dacor, all rights reserved.
Planning the Ductwork ..................................................... 8
Preparing the Mounting Location ..................................... 9
Installation Instructions .................................................. 11
Marking the Centerlines .................................................11
Installing the Holding Brackets ........................................11
Rotating the Blower(s) for Rear Exhaust ....................... 12
Assembling the Filters .................................................... 14
Using the Dual to Single Transition Kit# AHT10 ............ 15
Hanging the Range Hood .............................................. 16
Hardwiring the Hood ...................................................... 17
Verifying the Setup ......................................................... 19
The Installation Checklist ............................................... 19
Wiring Diagrams .............................................................. 20
Table of Contents
Before You Begin...
Important Safety Instructions .......................................... 1
Important Information About Safety Instructions .............. 1
General Safety Precautions ............................................. 2
Product Specifications .................................................... 3
General Specifications ..................................................... 3
Weight Specifications ....................................................... 3
Dimensions ...................................................................... 4
Preparation and Setup ...................................................... 6
Parts List .......................................................................... 6
Needed Tools and Hardware ........................................... 6
Meeting Electrical Codes ................................................. 6
Installing the Electrical Source ......................................... 7
Meeting Installation Requirements ................................... 7
Summary of Contents for RNHE36
Page 22: ...20 Wiring Diagrams RNHP3012 3018 RNHE3012 3018 Wiring Diagram 1 Blower 2 Light Models...
Page 23: ...21 Wiring Diagrams RNHP3612 3618 RNHE3612 3618 Wiring Diagram 1 Blower 3 Light Models...
Page 24: ...22 Wiring Diagrams RNHP4812 4818 RNHE4812 4818 Wiring Diagram 2 Blower 4 Light Models...
Page 25: ...23 Notes...
