12
Installation Instructions
Verifying Proper Operation
WARNING
Read the raised vent use and care manual com-
•
pletely before operation.
Install all of the front filters prior to operating the
•
raised vent. Refer to the use and care manual for
filter installation instructions.
CAUTION
To prevent damage to the raised vent power cord, route it
away from the surfaces of the range before connecting it.
Make sure the power switch on the top of the raised
1.
vent is in the up position.
Plug the raised vent power plug into the electrical out-
2.
let.
Press the power switch once to raise the vent to its
3.
operating position.
Once in the up position, turn the variable speed con-
4.
trol switch in both directions to verify that the blower
is operating correctly. Turn the variable speed control
switch counter-clockwise to hi-speed and clockwise to
low speed.
Press the top cap up/down switch once to lower the
5.
vent.
Installation Checklist
Are the anchor legs extended down to make contact
□
with the floor and tightened into place? Are the anchor
legs fastened to the floor? Is the unit level?
Is the duct work completely installed? Are all joints
□
attached with sheet metal screws and wrapped with
duct tape?
Is the power input for the remote blower connected to
□
the raised vent electrical access panel?
Are the vent filters installed according to these instruc-
□
tions?
Is the power cord routed away from the hot surfaces of
□
the range.
Is the unit connected to an electrical outlet that meets
□
the electrical specifications in these instructions?
Has proper operation been verified?
□
Have any problems been noted on the warranty card
□
or during the on-line activation? Has the warranty been
activated on-line or the warranty card been filled out
completely and mailed?
Summary of Contents for ERV36-ER
Page 15: ......
