Dacor Epicure EH3612, Installation Instructions Manual

Page: 31 / 48

1
Important Information About
Safety Instructions
The • Important Safety Instructions and warnings in
these instructions are not meant to cover all possible
problems and conditions that can occur. Use common
sense and caution when installing, maintaining or oper-
ating this or any other appliance.
Always contact the Dacor Customer Service Team
•
about problems and conditions that you don’t under-
stand.
Important Safety Instructions
Safety Symbols and Labels
dAnger
Immediate hazards that will result in severe personal
injury or death.
wArning
Hazards or unsafe practices that could result in severe
personal injury or death.
cAution
Hazards or unsafe practices that could result in minor
personal injury or property damage.
dAnger
To avoid the possibility of explosion or fire, do not store or use combustible, flammable or explosive vapors and liquids
(such as gasoline) inside or in the vicinity of this or any other appliance. Also keep items that could explode, such as
aerosol cans away from cooktop burners, ovens and range hoods. Do not store flammable or explosive materials in
adjacent cabinets or areas.
wArning
If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal
injury or death.
wArning
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer. a)
Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means b)
to prevent power from being switched on accidentally. When the service disconnecting means cannot be
locked, securely fasten a prominent warning device, such as a tag, to the service panel.
wArning
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable a)
codes and standards, including fire-rated construction.
Sufficient air is needed for proper combustion and exhausting of gases through the flue(chimney) of fuel
b)
burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety
standards such as those published by the National Fire Protection Association (NFPA), and the American
Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
c)
Ducted fans must always be vented to the outdoors. d)
reAd And sAve these instructions