Dacia 1304 2004, Repair Manual

Page: 233 / 654

MANUAL GEARBOX
21
21 - 39
HALF CRANKCASE ASSEMBLING
Place in the right side half crankcase
- primary shaft;
- secondary shaft together with the lock pin of the biconical bearing taking care that
the assembled forks to be positioned in their seats;
- the differential gear (
G.B. 365
and
G.B. 51C
).
Grease the assembling areas of the crankcases with sealing paste
LOCTITE 518
.
Place the left side half crankcase over the right side half crankcase; position correctly the
reverse selector.
Place the assembling screws of the half
crankcase and slightly tighten them.
Mount the spacer and tighten its attachment
screws at the required moment
(
1 - 1,4 daNm ).
Tighten the assembling screws of the half
crankcases at the required moment, observing
the tightening order specified in the drawing.
M 7 : 1,9-2,4 daNm
M 8 : 2,8-3,3 daNm
VELOCITY STEP V PINION REMOUNTING
Place the following parts on the primary shaft:
- the spacer;
- the inner bushing and needle casings;
- the free pinion of velocity step
V
;
- the synchronizer assembly together with
the fork and shaft for velocity step V ;
- the elastic washer;
- the locking nut.
Mount the elastic pin of fork for. velocity step
V , by means CV 31 B mandrel.
NOTE:
The synchronizer for velocity step V shall be assembled in the same way as the one
for velocity steps I - II; mount additionally the retentive segment.
REPAIR
vnx.su