Dacia 1304 2004, Repair Manual

Page: 148 / 654

IGNITION AND INJECTION
17
17 - 12
From now on, we can calculate the injection time (
t
i
), the injection moment and the
ignition advance moment for each engine cycle.
The rotation sensor is fixed on the clutch case of the gearbox therefore it should be at
1
± 0,5 mm
from the teeth peak of the flywheel.
The connector for the rotation sensor has the following connections (drawing
8
):
1,2
– capture of rotation signal
3
– screening
The sensor functioning can be checked by connecting the connector pins
1
and
2
or the
computer pins
3
and
21
to an oscilloscope. A good sensor will generate a signal shaped as
in drawing 8, during the engine functioning, in which we can identify the following:
A = gear toothed area (rotation signal)
B = the 2 missing teeth area
C
= the first tooth area (reference signal)
The rotation sensor is not to be repaired but replaced.
Fig. 8 Fig.9
The rotation signal level should be Uss > 2,5 V, otherwise the engine won’t start.
The reference value R
1-2
= 650 – 1100 Ù at an environmental temperature of 20°C.
DESCRIPTION OF THE SYSTEM
vnx.su