27x | ubiQ® | Gebrauchsanweisung / Instructions for use
DACH Schutzbekleidung GmbH & Co. KG | [email protected] | V20220421 | 4 / 19
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
a.
b.
7.
8.
9.
10.
1.
a.
b.
c.
d.
FITTING INSTRUCTIONS:
Unfold the mask into a bowl shape.
Place the lower half under the chin. Pull the elastic band behind the head.
Place lower band around back of neck. Place the upper band on the back of the head above the ears and adjust so
that it applies even pressure all over.
Use both hands to press the nose clip against the nose to seal the area around the nose.
Tightness test: Grasp the mask with both hands and exhale forcefully. If there are leaks, adjust the mask slightly to
fit the shape of the face.
*NOTE
: Replace the mask immediately if breathing becomes difficult or if the mask is damaged or deformed in
such a way that an optimal seal can no longer be guaranteed. Use mask only in accordance with these fitting
instructions.
WARNINGS:
Failure to follow the instructions given here or restrictions on use of this product may reduce the effectiveness of
this mask and result in nausea or even death.
A carefully selected mask is essential to protect your health. Before using this mask, consult an appropriate safety
organisation to determine if this mask meets the requirements of the intended use.
Filtering half masks are dependent on the ambient atmosphere. Use only in adequately ventilated environments.
Do not use if the atmosphere contains less than 17% oxygen.
Respirators must not be used if the concentration of harmful substances poses an immediate threat to health or
life.
Do not use in an explosive atmosphere.
Leave the work area immediately,
if breathing becomes difficult,
dizziness or exhaustion occurs.
Facial hair and special characteristics of the face shape may reduce the effectiveness of this mask.
Do not make any changes or modifications to the mask.
Intended for single use.
No maintenance required.
Dispose of properly after use.
Store masks in packaging away from direct sunlight until ready to use.
MEANING OF THE ICONS/SYMBOLS:
Meaning
See user information.
Temperature range during storage.
Maximum humidity level during storage.
End of shelf life. yyyy = year; mm = month.
