dacell SM110, Instruction Manual, Page: 6 / 12

DACELL CO., LTD
http://www.dacell.com
TEL:+82-43-2602242, FAX : +82-43-2602245
6
3) KEY operation
Key result Description
Mode
select 1. HI → LO → FS → DP → CAL → FS+CAL → FS+ DP → DP+CAL
2. All FND of selected mode will blink.
Position
select 3. Press key : 1 0000 → 1 000 → 1 00 → 1 0 → 1
Selected digit position will blink
4. DP(decimal point mode) : decimal point
position movement key.
10.000
→ 100.00 → 1000.0 → 10000
Number
select 5. Data correction key.
6. 5 digit
→ 1, -1, -, non
7. The others 1 → 2 → 3 → 4 → 5 → 6 → 7 → 8 → 9 → 0
Input 8. Input data. After setting up must press
key therefore become input.
＋
Auto zero 9. Sensor : No load state(0V, 4
㎃
)
10. Display : 0
4) PROTECTION mode
Use this mode for protection and security of System.
high, low data is possible to adjust irrespectively.
Key result Description
＋ Lock
mode 11. Protect setting data.
12. Reset lock mode to adjust data
Mode confirm and setting
Unlock * Press and key during 5 sec at the same time
FS, DP, CAL LED will light up and reset lock mode (data correction enable)
Lock * Press and key during 5 sec at the same
time in unlock mode : FS, DP, CAL LED turn off (lock mode)
* power off : Set lock mode automatically.