Dabi Atlante PROFI CLASS, Owner'S Manual

Page: 17 / 23

17
English
English
4
5
6
1
7
2
4
5
6
7
3
5
6
7
The ‘DABI ATLANTE’ name will be displayed
during a power outage and while the
equipment is in standby mode.
2 - Observe the indicators below, which are used to
display your Profi Class status:
1 – Indicates the “Perio Ultrasound” function is
actuated.
2 – Indicates the “Endo Ultrasound” function is
actuated.
3 – Indicates the “Bicarbonate Jet” function is
actuated.
The “Sodium Bicarbonate Jet” function has
no power indications, since it operates with
stabilized air pressure.
4 – Indicates the effective power for the function.
The power can be either increased or decreased
by pressing keys
and .
5 – Indicator that the “Peristaltic Pump” is actuated.
6 – Indicates the “Peristaltic Pump” flow rate level.
Flow rate can be adjusted by pressing key .
There are 4 levels: R0 (off), R1, R2, and R3.
10
7 – Indicates the memory programming for the
selected function.
8 – Indicates the “Dentistry” function is actuated.
9 – Indicates the selected “Dentistry Tip”.
10 – Indicates the “Dentistry Tip” programming
has been altered.
3 – Selection of Dentistry Tip:
Press the key and the following screen will be
displayed:
Press the key until the desired Tip is selected.
The ultrasound power and the peristaltic pump flow
rate are factory programmed.
In order to alter the programming, press or
for power and for the “Peristaltic Pump”.
Both factory programming and new programming
can be memorized in keys:
.
4 – Transducer cooling:
During the utilization of ultrasound with Tips that
need no irrigation (water), the handpiece warms
up. The Profi Class has a timekeeping system that
automatically switches off the unit when necessary.
At that moment, a warning will be displayed to
wait for the unit to cool down.
5 – Replacement of the “Peristaltic Pump”:
The system identifies pump wear and, if necessary,
suggests its replacement by displaying the following
warning. Press key
to clear the warning.
9
8
9
8