![background image](http://html1.mh-extra.com/html/dab/e-sybox-mini/e-sybox-mini_assembly-and-dismantling-manual_495509036.webp)
Place the whole inside block on
the back cover and secure it with
its four screws (the two in picture
and the corresponding ones on
the other side)
Check the connections for dirt,
oxide, etc before reconnecting all
the components
If present (KIWA version of E.sy-
box Mini), reconnect the KIWA
pressure sensor (K)
K
Plug in the display flat cable
ASSEMBLING
35
37
38
39
Summary of Contents for E SYBOX MINI
