69
Mixer
•
FX algorithms
3
•
Join
– This LED works only when
Sync.
is on. If
Join
is turned on, it means the delay lines for the right and
left channel are joined together and we set a delay time globally for both of them by setting a delay time
for the left channel only (L column).
•
St.Spread
– Stereo spread is a linear (additional) delay between the left and right channel. Therefore, if:
•
Sync. Is Off
– When the Delay effect is not synchronized with a host application, the maximal delay
between the left and right channel is 50% of the Delay time knob value.
•
Sync. Is On
– When the Delay effect is synchronized with a host application, the maximal delay value
between left and right channel is a half of the rhythmical value set in a L column.
•
Feedback
– Feedback value of the Delay effect.
The filter in a feedback loop is controlled by following parameters:
•
Cuttoff
– Cutoff frequency.
•
Resonance
.
•
Filter Type
–
OFF
(no filter),
Lp
(Low-pass filter),
Bp
(Band-pass filter),
Hp
(High-pass filter).
LED in the Delay's top bar works in toggle mode and is responsible for turning on and off the effect:
FX Delay - example 1
FX 2 - Delay - Top bar