66
Mixer
•
FX algorithms
3
Here we can distinguish the following groups of parameters:
•
Early reflections:
•
Size
– Size of the room for early reflections only.
•
Diffusion
- It is the reflecting surface’s ability to spread the echo out. If this parameter is set to
Sharp
, the
reflecting surface is perfectly flat and does not distort the reflected wave. In the case of setting this value to
Smooth
, the reflecting surface distorts wave and spread out into different directions.
•
Attenuation
- This parameter changes the characteristic of the wall’s surface, its dumping properties.
•
Late reflections:
•
Size
- Size of the room for late reflections only.
•
Diffusion
.
•
Attenuation
.
•
Feedback
- Controls how much of wave energy is consumed every reflection. The smaller the value the more
energy is consumed in every reflection, meaning the feedback is weaker.
•
Three other parameters:
•
Predelay
- Delay between dry signal and reverberation.
•
Modulation
- It isa parameter, which controls the delay lines disturbance.
•
X-Fader
– Cross-fade between early reflections output and late reflections output.
LED in the Reverb's top bar works in toggle mode and is responsible for turning on and off the effect:
Since Reverb contains quite a big number of parameters, there is also a
Preset management
section, in which we can
do the preset management for a Reverb:
FX 1 - Reverb - Top bar
