background image

10

2

Layer 

• 

Layer settings

Layer's transposition in the range of -

24

 to +

24

 halftones.

  • 

Zone

 

Apart from the MIDI channel, we can also set a keyboard 

Zone

, to which the 

Layer

 will be responding, by creating a 

split, if keyboard zones are disjunctive and 

Layers

 listen to the same MIDI channel. The keyboard 

Zone

 is defined by 

two notes, and contains all the notes between those two. The lower note defines the beginning (

From

) and the higher 

note defines the end of the 

Zone

 (

To

).

Additionally we can use the 

Learn

 function to define a 

Zone

 directly from the MIDI keyboard:

    1. Press 

Learn

 button. 

    2.  The plug-in is now waiting for two MIDI Note messages, by listening to all MIDI channels (ignoring 

Channel

 

number setting from 

Layer

). 

    3.  When you press two keys (at once or one by one) on your MIDI keyboard, the plug-in will automatically set the 

beginning and the end of a 

Zone 

(

From

 and 

To

 LED displays) taking the lower note as the beginning and the 

higher note as the end. 

  • 

Voices

 - Polyphony settings: 

In this section we can edit 

Polyphony

 and 

Portamento

 settings for the 

Layer

:

Layer's zone

Voices - polyphony settings

Summary of Contents for LuSH-101





































































































Reviews: