20
Default Presets
D16 provides a set of default presets with Redoptor. They are applied to every new instance of the plug-in. If a bank
of presets is created which should be applied every time instead of factory presets, it is possible to select such
an on option
Default Presets
section:
Options available in the
Default Presets
section:
•
Factory Presets
– Default value after installing Redoptor. Choosing this option loads the factory presets with
every new instance of the plug-in.
•
Clear Preset
– Zeroed parameters with every new instance of the plug-in.
•
User Defined
– Preset bank selected by the user. When choosing User Defined option, the Browse button
on the right side is activated. Using this button opens a dialog box in order to select a path to the user’s preset
bank. Confirming the path saves it in the Redoptor configuration file. The selected preset bank will be loaded
as default.
The text box on the left from the
Browse
button shows the path to the user’s preset bank.
Configuration
•
Presets tab
4
Default presets selection
