15
Midi learn
Assigning a Redoptor control to the MIDI controller requires:
1. Checking
Midi Learn Mode
checkbox in the
Midi Control
tab:
2. In the status bar in the bottom section of GUI a message should appear “waiting for a controller or parameter
movement…”:
In this mode the plug-in waits for any change in the parameter value (movement of any control on GUI)
and for the movement of any MIDI CC control from the external MIDI controller, which operates on an active
MIDI input channel directed to Redoptor. The order of these actions is irrelevant.
During the above-mentioned actions, the status bar informs about the currently changing values of controls
and provides their names.
Configuration
•
Midi control tab
4
Midi Learn Mode selection checkbox
Status bar
