16
How to Test Your Collar
A)
Place the test lamp on the electrodes of the receiver (as shown below).
B)
Set the stimulation to level 4 or 5.
C)
Push Button II.
D)
A red light on the test light should light up and the unit will either vibrate
or sound a “Beep”.
Trouble Shooting Questions & Answers
1) Q : My Collar’s range is not as far as when I first bought the unit.
A : (a) Test batteries. They may be low.
(b) Fully extend transmitter antenna.
2) Q : All of a sudden, “Nick” (momentary stimulation) works like
continuous stimulation.
A : This indicates a low battery in receiver unit. You may continue
to use the unit until it stops working.
3) Q : The unit is not working after I replaced the battery.
A : You might have installed the batteries incorrectly. Re-read the
section of this manual on “How to Change the Battery” very
carefully and try again.
4) Q : When I hold the Magnet to the M to turn the unit on it emits a
continuous string of quick beeps.
A : This indicates that the battery is almost dead. Simply replace the
battery.
5
Ultra-
e
TM
Model and Function
Ultra-
e
2020
Button Functions:
# I
- “Nick”
# II - Continuous Stimulation & Vibration Simultaneously
# III - Vibration only
# IV - Intensity Level adjustment
(See page 11 for instructions on how to change
Ultra-
e
TM
batteries)
Transmitter
Collar/Receiver
