D-MAX DAZ-530, User Manual

Page: 34 / 39

INIT : Internal synchronization
▶
COMM ADJ : Use this feature to select communication
protocol. Position the indicator over 'COMMUNICATION' by
using the UP or DOWN button.
CAM ID : Assign an ID number
t o t h e c a m e r a ( 1 t o 2 5 5 ) .
I d e n t i f i c a t i o n n u m b e r z e r o i s
u s e d f o r R e m o t e c o n t r o l l e r
setup.
DISP CAM ID : Displays camera ID on top left corner of the
screen.
BAUD RATE : Configure baud rate from 2400/4800/9600/
19200/38400/57600 bps.
UART MODE : Configure parity bit to NON, EVEN, or
ODD. Data bit is set to 8bit, and stop bit to 1bit. Set the
UART MODE to EVEN if using the Remote Controller.
3 3
▶
☞
Notes
Be careful of that It can be run by the CAM ID value when using RS-485
communication and the RS-485 can have a problem if DISP CAM ID is OFF
because user can not memorize the ID.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지33 (주)조은