D-MAX DAZ-530, User Manual

Page: 17 / 39

DOWN button.
2. Set 'WHITE BAL' using the LEFT or RIGHT button.
※
The three white balance control modes are as follows.
▶ ATW(Auto Tracking White Balance) : OUTDOOR: This
mode can be used within the color temperature range
1800~10500
°
K
(Ex: fluorescent light, outdoor, sodium vapor lamp or
inside tunnels)
INDOOR : This mode can be used within the color
temperature range 3000K~10500
°
K .
▶
AWC(Auto White balance Control) : The white balance
is automatically adjusted in a specific environment. In
order to obtain the best result, press the SET button while
the camera focuses on white paper. If the environment
including the light source is changed, you have to adjust
the white balance again.
▶
Manual : To fine adjust, select the Manual mode. You
can increase or decrease the red or blue factor while
m o n i t o r i n g t h e d i f f e r e n c e o n t h e s c r e e n . S e t t o
‘
M A N U A L
’
mode and press the SET button. Increase or
decrease the value for red(R-Gain) and blue(B-Gain),
◀
1 6
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지16 (주)조은