D-Link xStack Hardware Installation Manual Download Page 24

Page: 24 / 71

xStack® DGS-3420 Series Layer 2+ Managed Stackable Gigabit Switch Hardware Installation Reference Guide

Connecting to a Redundant Power Supply

The Switch connects to the Master Switch using a 14-pin DC power cable. A standard, three-pronged AC power cable
connects the redundant power supply to the main power source.

Figure 2–6 Connecting a DGS-3420 Series Switch to the DPS-500 (28TC, 28SC, 26SC, and 52T)

1. Insert one end of the 14-pin DC power cable into the port on the switch and the other end into the redundant

power supply.

2. Using a standard AC power cable, connect the redundant power supply to the main AC power source. A green

LED on the front of the DPS-500 will glow to indicate a successful connection.

3. Re-connect the switch to the AC power source. The LED indicator will show that a redundant power supply is now

in operation.

4. Do not make any changes on the switch.

NOTE:

See the DPS-500 documentation for more information.

CAUTION:

Only the DGS-3420-28TC, DGS-3420-28SC, DGS-3420-26SC, and the DGS-3420-52T

use the DPS-500. The DGS-3420-28PC and the DGS-3420-52P use the DPS-700.

Summary of Contents for xStack








































































Search results

Summary of Contents for xStack

Reviews:

Related manuals for xStack

Brands by name

Popular brands

D-Link xStack, Hardware Installation Manual

Search results

Summary of Contents for xStack

Reviews:

Related manuals for xStack

Brands by name

Popular brands